Farm Utility Tractors have been used to press down Tee Posts from their beginning. The problems are leveling out the bucket over a tee post then the post needs to slide as the bucket comes down. It’s just not a sure thing. Second dry ground or Desert/Duty should have these words add to it (impossible without help). Our Drives make this way easier, but extremes are challenging for everyone. Your utility tractor shouldn’t have any type implement off the back. (This would turn your tractor into a teeter/tauter and you lose the engine front weight advantage. It is already tough for compact/tractors with their light engines.) How to help? With our Front-Clamp the bucket is tilted up allowing if needed the ability to add weight in the right corner of your bucket. To be clear too much weight will make the lifting and lowering dangerous but some weight it fine. (The very best place to add weight is between the front tires.) Our Clamp is held onto your bucket by drilling a 1/2" hole. Top of Clamp is threaded to except our 1/2" bolt. This bolt goes through from the bottom of Clamp then up through your bucket to be threaded into Clamp. (No wedging bolt from the top. It just won't hold together). Time to place your t-posts in the box with the posts sticking out over the right and please take it slow at first until you have your safety operations of your tractor down.